Diameter Chamfer Length
1.000 - 5.000  Up to 0.5mm
5.005 - 8.000  0.8mm
8.005 - 14.100 1.0mm
Features
     
  1. H.S.S. Reamer
  2. DLC (Diamond Like Coating)
  3. End Mill Shank
Cutting Conditions
1. Cutting Speed

Work-piece Alminum Alloy (A/ADC) Copper Alloy
Cutting Speed (m/min) 15 - 30  10 - 20

 2. Feed
Diameter
(mm)
1.0 3.0 6.0 8.0 10.0 12.0
Feed
(mm/rev)
0.1 - 0.05 0.05 - 0.1  0.05 - 0.1 0.08 - 0.25 0.1 - 0.3 0.15 - 0.35
Removal
Amount
(mm)
0.1 0.2 0.2 0.3 0.3 0.3
Technical Data
 
Comparison of surface roughness between DLC coated HSS reamer and non-coated HSS reamer.
Reamer Diameter  6.000mm
Speed  20m/min
Revolution  1060times/min
Feed  0.08mm/rev
Removal amount in dia.  0.2mm
Work-piece  Alminum Alloy(A7075)
Length of hole  20mm Thru hole
Oil  Water soluble 

 

Specification Table:Tolerance Diameter = 0 / +0.005mm (J5) for all sizes

Diameter
D
(mm)
Flute
Length
l
(mm)
Overall
Length
L
(mm)
Body
Length
l2
(mm)
Shank
Diameter
d
(mm)
Number
of
flutes
HD1.000-1.495 20 40 - 3.0 4
HD1.500-1.695 22 45
HD1.700-1.895 25 50
HD1.900-2.395 30 60
HD2.400-2.895 35 65
HD2.900-3.000 40 70 50 6
HD3.005-3.500 75 4.0
HD3.505-4.000 80
HD4.005-4.500 45 85 55 6.0
HD4.505-5.000 90
HD5.005-5.500 95 60
HD5.505-6.000 50 100 65
HD6.005-6.500 8.0
HD6.505-7.000 55 105 70
HD7.005-7.500 110
HD7.505-8.000 60 115 75
HD8.005-8.500 120 10.0
HD8.505-9.500 65 125 80
HD9.505-10.000 70 130 85
HD10.005-10.500 135 12.0
HD10.505-11.000 75 140 90
HD11.005-11.500 145 95
HD11.505-12.000 150
HD12.005-12.500 80 155 100 16.0 8
HD12.505-13.000 160
HD13.005-14.100 85 165 105